Âé¶¹ÒùÔº

February 5, 2025

Scientists make progress in producing Hâ‚‚-rich syngas from biomass gasification

Foliated Ni/Ca3AlO catalysts are used for biomass gasification to achieve high stability hydrogen production. Credit: Yin Jiao
× close
Foliated Ni/Ca3AlO catalysts are used for biomass gasification to achieve high stability hydrogen production. Credit: Yin Jiao

The production of hydrogen from biomass has garnered increasing attention, with thermochemical methods emerging as the most widely adopted approach. Among these, steam gasification stands out as a particularly promising technique for producing H2-rich syngas.

However, a major challenge associated with the gasification process is the formation of tar, which can cause equipment corrosion and pipeline blockages, significantly compromising the overall efficiency of the process.

The addition of catalysts during gasification has proven effective in cracking tar and enhancing hydrogen production. Moreover, inorganic minerals found in biomass, such as alkali and alkaline earth metals (AAEMs), have been observed to promote the production of H2-rich syngas. However, further research is required to clarify how AAEMs impact gas production and the mechanisms behind the interactions among different metals.

To tackle these challenges, a research team led by Prof. Yin Jiao from the Xinjiang Technical Institute of Âé¶¹ÒùÔºics and Chemistry of the Chinese Academy of Sciences has developed a series of Ni/CaO-Ca12Al14O33 catalysts. The team has made significant progress in improving the stability of these catalysts.

The research is published in the journal .

Experimental results indicated that the Ni/Ca3AlO catalyst demonstrated excellent catalytic performance and cyclic stability. The yield and concentration of hydrogen in the syngas were measured at 30.08 mmol/gbiomass and 60.61 vol% during the initial reaction. Notably, minimal deposition and slight sintering were observed on the catalyst surface after ten cycles.

The catalyst's remarkable anti-sintering performance was mainly attributed to its unique blade-like morphology, which effectively enhanced metal-carrier interactions, thereby preventing Ostwald ripening.

The research provides a theoretical foundation for the design of novel nickel-based catalysts and their application in from biomass catalytic .

Furthermore, the inhibition of filamentary carbon formation by Ca12Al14O33 in the carriers and the suppression of encapsulated carbon precursors through calcium doping contributed to the 's resistance to carbon accumulation.

More information: Ruiqiang Huo et al, A highly stable leaf-like Ni/Ca3AlO catalyst for hydrogen production from biomass gasification, Energy (2025).

Load comments (0)

This article has been reviewed according to Science X's and . have highlighted the following attributes while ensuring the content's credibility:

fact-checked
trusted source
proofread

Get Instant Summarized Text (GIST)

Hydrogen production from biomass via steam gasification faces challenges due to tar formation, which affects efficiency. Catalysts, particularly Ni/CaO-Ca12Al14O33, have shown promise in enhancing H2 yield and stability by cracking tar and reducing carbon deposition. The unique morphology of these catalysts improves metal-carrier interactions, preventing sintering and carbon accumulation, thus offering a foundation for future catalyst design.

This summary was automatically generated using LLM.